IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Dimension Nylon Toe Clips. Included instructions account for toe strap installation, but straps must be purchased separately -Toe straps are NOT included -Sold as a pair
Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
Designed to work with Odyssey JC/PC pedals.
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
RaceFace Chester Pedal Pin Kit 20 Pins Black
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 430mm length
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - Poly leather (vegan) toe strap - Velvet finish - 450mm length
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a Removable reflector for mounting prior to purchase - Includes…
Replacement pin set for Race Face Atlas and Aeffect pedals.
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm…
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
- NJS/Keirin certified chrome plated steel clips for single toe strap - Hardware included
• Nylon construction • Intended for use with double-strap toe straps (sold separately) • Includes mounting hardware • 36 grams per pair
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward
Serfas' MTB Cleats are durable steel replacement cleats for use with Shimano SPD-compatible clipless pedals and shoes. They offer 4 degrees of float and weigh 73 grams per pair. If your old cleats are Shimano model SH51, SH55 or SH56, these replacements will work. Installation hardware is included.
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
• Cleats to fit Ritchey Echelon and Look Keo clipless pedals • Includes a pair of cleats and hardware
• Includes a pair of cleats and mounting hardware • Compatible with Ritchey Pro-V4 and V5 mountain clipless pedals
Power Pedal Cleats cleats work with PowerTap P1 Pedals (sold separately)
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.